SBC Starter Kits

[IceMan]

Now available: Synapse Boost Connect Starter Kits.

The kits are available in 3 different color combo hoses, white & black, white & blue, and white & red. 

Each kit comes complete with 3 meters of high temp PTFE hose (white), and 1 of the 3 meters low temp PU hose (blue, black, or red).  In addition, each kit will come with 11 different connectors:

1 x 6 mm 5 Port Plastic Manifold Connector Low Temp (Black)
1 x 6 mm 3 Port Plastic Y Connector Low Temp (Black)
2 x 6 mm Plastic Plug Low Temp (Black)
2 x 6 mm Plastic & Nickel Plated Brass Fitting Straight 12mm wrench with 1/8th NPT thread Low Temp (Silver/Black)
2 x 6 mm Plastic & Nickel Plated Brass Fitting 90 degree 10mm Wrench With 1/8th NPT thread Low Temp (Silver/Black)
1 x 6 mm All Metal, Nickel-Plated Brass Tee High Temp (Silver)
1 x 6 mm All Metal Nickel Plated Brass Fitting 90 degree 10mm Wrench With 1/8th NPT Thread High Temp (Silver)
1 x 6 mm All Metal Nickel Plated Brass Fitting Straight 12mm Wrench With 1/8th NPT Thread High Temp (Silver)

Part #: SBC06KITBLK (MSRP: USD $65.00)


Part #: SBC06KITRED (MSRP: USD $65.00)


Part #: SBC06KITBLU (MSRP: USD $65.00)


The kits above include both high temp and low temp fittings and lines.  The kits below are only either high temp, or low temp

Low/Medium Temp Starter Kit
Part #: SBC06KITBLKLT (MSRP: USD $18.00)


High Temp Starter Kit
Part #: SBC06KITWHTHT (MSRP: USD $42.00)

[MindlessChild]

These look great.

But im a bit confused on what i need to order.

So i have a Rsx with a 37R and i want to buy a kit that will replace all my vac lines on the kit.

I recently blew my motor for a faulty vac line and the re-build starts this weekend. im looking for well over 700 WHP and i need this kit


So do you guys sell pre-made kits for the rsx or do i have to part one togeather ?


Mindless

[IceMan]

These look great.

But im a bit confused on what i need to order.

So i have a Rsx with a 37R and i want to buy a kit that will replace all my vac lines on the kit.

I recently blew my motor for a faulty vac line and the re-build starts this weekend. im looking for well over 700 WHP and i need this kit


So do you guys sell pre-made kits for the rsx or do i have to part one togeather ?


Mindless

Hoses:

White = High Temp
Any other color = Low Temp

Connectors:

All metal = High Temp
Black or other color = Low/Medium Temp

Any hoses used on the hotside/exhaust side of the car, use white.

Any hoses used on the cold side or away from the exhaust side, you can use the low temp hoses.

[synapseengineering]

Let's break it down for what you need for fittings first:

Tial Wastegate - 2 high-temp threaded fittings
                Bottom of the wastegate = 1
                Top of the wastegate = 1
                High-temp hose

Synapse BOV - 0 fittings
                Hose goes straight into brass fittings
                Low-temp hose

Compressor Housing/Boost Source -
                1 low-temp threaded fitting
                High temp hose

Vacuum Source -
                1 low-temp threaded fitting
                1 distribution block
                Low temp hose

Boost control solenoid -
                2 low temp threaded fittings

Totals:

Low temp threaded fittings = 4
Distribution block = 1
High temp threaded fittings = 2

Part #: SBC06KITBLK (MSRP: USD $65.00) should cover all your needs, just pick your color.  You may need a little more hose depending on your install, but you can just order some more hose as well in 10 foot sections.

[MindlessChild]

Perfect thank you sooo much

[MindlessChild]

So should i order this from you guys or club ?

and it seems i dont need any hight temp hoses since all my connections are either away from my manifold or infront of the motor correct ?

[IceMan]

Since you're a member of Club RSX already, then it would be easier for you to just order through the forum site.  However, we are here to help you should you run into any difficulties or need any help.   

[boostdtalon]

Ok i have a friend with a RX-7. As i now know those things have a metric ass ton of vacuum lines. so i take it this would be very beneficial to him to get this kit.

[owen]

I apologies if this sounds silly but are they a direct replacement for the brass barbs on the wastegate?
I ask because the orientation of the wastegate, In my car is that the barbs are facing the exhaust housing and it keeps melting the silicone lines so I need a 90* fitting that replaces the barb fitting and is away from the extreme heat

[owen]

wow this site slowwwwwwwwwwwwwwwwwwwwwwwwww

[boostwhore]

The hoses push straight onto the brass fittings.  They are not a direct replacement at this time.  You can, however, take your wastegate apart and clock/rotate the housing so that the hoses are not facing the hot spots.

[OG 187]

Where to buy this Kit when living in Germany?!?!
How much is shipping?!?

Im running your BOV vented to the athmosphere with my Lexus IS200 with Eaton M62 supercharger

[IceMan]

http://synapseengineering.pinnaclecart.com/

you have any pics of the bov installed on the IS with the Eaton?